Modified Datsun Go Panca M / T 2015 as Drive In Space

The rear door wing models, J-one perform a custom of a rear plate

Jakarta, Indonesia - actually not a player Irwan car modification. In his home town of Garut, West Java, change the look of 2-wheel vehicles, just so the business is practiced. But so is another story, as he is familiarly called J-one has a 2015 Datsun Go Panca output.

"From the figure already appears sporty, with only a few changes, it could be the appearance will be great," he said. Changes do is to install body kit and replace aftermarket rims. But it turns from a bit of it, just to make J-one wants to proceed with the project to make a handsome Go Panca hers.

Audio system made no less festive with the cabin and exterior

So do next is to give an accent like stars in space. "Incidentally, I can airbrush and kids love affair with that space," he explained. Feeling increasingly fitted with a touch on the figure of this hatchback, the project increasingly continued.

However, J-one remain a good head of the family, which for business continuity changes made passing a discussion with his wife. As a result of the family council, obtained Planeto Xtreme concept. What is in the contents of the head of J-one that is applied to the concept.

The inside Cotton, such as driving in the sky

Such as on the body that uses a custom body kit made of fiberglass. Also the implementation of changes Rocket Bunny on the front and rear fenders that have the same size, which stretched 10 cm.

Of course the size is not the origin of stretchy only. "The use of Thor rim diameter of 15 inches and a width of about 10 inches, so the background of the decision of how much fender melarnya part," said the man who also attach the moonroof.

Airbrush star on the body, is upgraded by adding color and some of the celestial bodies. So now the whole body Datsun Go like being in outer space. diseuaikan interior with a concept promoted.

"Plus with cotton in the cabin, making my wife and kids feel like driving on a cloud," told steadily. • blogosmile

Car modification

Rim: Thor R15
Body kit: Custom Rocket Bunny
Front door: Gullwing
Rear Doors: Wing
Seat: Bride
Safety Belt: Recaro
Roll-bar: Custom
Head unit: Pioneer
Power Amplifier: ADS 4 Channel
Monoblock: AMV
Speaker: 3-way Sony

Plus: The rear door wing models without hydraulic
Minus: The hood is less cool

Honda Jazz RS modification M / T 2013 Street Racing

Audio system more cool, has a special workshop audio Wanto

Lamongan, East Java, Indonesia - It's been more than 20 years, living in the world Suwanto modification. The location of his workshop in the village Kemlagi Gede Lamongan, East Java deter baseball to show off their work in the contest, both regional and national levels.

Well this time, Honda Jazz RS output in 2013 is used as material. "The flow that carried not be strange, just street racing. But the absolute appearance neat, "said the man who is familiarly called Wanto it.

A rim size of 18 inches, making fender should be made of elastic

Indeed, what is done by the crew Cello Audio Revan his workshop, like most concept of street racing. But the selection of yellow color on the body, enough to attract attention.

After some investigation, it turns the color of Jazz belonged wantu white original. Washed down with a yellow color similar to the reason that the default standard of Jazz's latest.

Yellow color was baseball left intersects with the interior. Therefore, Wanto choose MBtech seat material labeled with the same color as the exterior.

Body kit made of fiberglass with a custom model

The legs, especially the suspension, air suspension applying labeled Viair 2 points. Wide rim with a diameter of 18 inches so the house black rubber labeled Falken 225 / 40R18.

Applying the rim, making the body to be adjusted. In this case, the fenders are made stretchy. "The front was stretched 6 cm and approximately 8 cm behind," said the curly-haired man.

Unfortunately, while carrying the concept of street racing, but baseball is change the engine that makes this Jazz performance increase.

But as it aims to show off, then labeled Brembo calipers (4 pots) relied on the sides of the front braking system. • oct / otomotifnet.com


Data Modification

Ban: Falken 225 / 40R18
Rim: Rays R18
Body kit: Custom
Seat: MBtech
Air suspension: Viair 2 Point
Power amplifiers: Venom 4 Channel
Monoblock: Venom
Speaker: 3-way Venom
Subwoofer: Venom 12 Inches
Processor: Venom

Plus: The exterior is fitted with a style that carried
Minus: The interior is not street racing

Modification Honda Civic 1.8, fusing Performance and Contests!

Airbrush technique on some parts

Jakarta - The owner's full name Renat Juanda, had a headache when trying to determine the choice of modifying the vehicle. But the headache is not the matter of selection of the flow modification. "The issue of flow, it is definitely street racing. Dizziness had more to create performace or contest, "said the owner of the 2006 Honda Civic output.

After a while weighing, it was decided to play in the contest area. The reason is because the vehicle is still used daily. However, modification of street racing wing which do touch on almost all parts of the vehicle. From the start the engine, body, legs up to the interior. Ya like giddy young businessman result of this travel field. , (Blogosmile)

The process of opening the lid using a motorized system

exterior
Let's look from the front, is certainly less powerful engine hood if you use the default. So in this section, selected models are applied to the Civic GT. The process of opening the lid using a motorized system.

The use of this system, it is definitely deviated from the business performance. This custom made by those who are fond of the contest. Design of congenital Civic GT baseball just stuck in the engine hood. Overall body kit installed, also using the design of the sporty sedan.

Bride bucket seats LowMAxx Carbon-custom by adding leather

interior
Seen from the outside only, are already evident what is done by the chairman of the Indonesian community Squad FD. In short, it really racing. From start to come off the back seat, using a 6 point roll-cage, bucket seats Bride LowMAxx Carbon, Takata 4 point safety belt and several other supporting part.
                            
"Therefore, for the contest, the seat-custom by adding leather. In addition, the durability of the goods in order to keep the original, 'said Renat matter of custom made on the

6 point roll-cage

Machine
standard engine is 2,000 cc, was removed and replaced with the engine from the Civic Type R K20A coded. Let Asoy Geboy performance, intake BRC and 310 cc injectors were taken from the same vehicle with the engine.

Engineering Civic Type R K20A coded.

"Throttle body of his grimy from Accord C19 64 mm in diameter," said the tall man. Plus with mounting Dastek Unichip Q4, exhaust system and other parts. Measured on the engine dyno, its power reaches 138 hp. If it's like this, emotions must be controlled.

Leg-Leg
18-inch rim size of Japanese goods combined tire size 225/40. This combination makes part of the body is made slightly elastic. "Just be 3 cm," he explained briefly.

Engine performance has been increased, making Renat feel the need to use big brake kit (K-Sport, 8 pot calipers and rotors 330 mm).

In addition it is made after the display gahar the legs when I'm contest modifications. Use the existing suspension race specification label. The details in this section use coilover Buddy Club N +.

carbon
Arguably, Renat spelled out in total when installing a carbon material. "Just a carbon backed pillar yet," joked Renat. If the total, there are 200 parts of Civic FD2 is layered carbon.

From the start to the exterior, the interior up to the audio system in the trunk. Great Effort in the affairs of this carbon, there was no doubt. Some say accessories only and most tragic, mistaken stickers patterned carbon.

airbrush
Seeperti tattoo on the body, once the picture is inscribed lifelong attachment. Even with today's technology, tattoos can be removed. More or less as it is in Benat Renat, when deciding wanted to carve the image with the airbrush technique on some parts of the vehicle.

Ever think want to paste drawing anime. "But fear of a moment of boredom. After cradling some suggestions from Tomi Airbrush, finally I select images flames. Tend baseball is boring, "as the reason.

Audio
Therefore it was decided to exist in the contest, then there is an audio system that placement in the cabin and trunk. In this section consists of a Pioneer headunit double din, Rockford 12 inch subwoofer, power amplifier 4chanel, monoblock power amplifier, speaker and speaker Flux 3way Trans coaxial.Mesin
standard engine is 2,000 cc, was removed and replaced with the engine from the Civic Type R K20A coded. Let Asoy Geboy performance, intake BRC and 310 cc injectors were taken from the same vehicle with the engine.

"Throttle body of his grimy from Accord C19 64 mm in diameter," said the tall man. Plus with mounting Dastek Unichip Q4, exhaust system and other parts. Measured on the engine dyno, its power reaches 138 hp. If it's like this, emotions must be controlled.

Car modification

• K20A engine swap
• Intake BRC Civic type R
• Injector 310 cc Civic type R
• Throttle Body (J35) Accord CL9 64 mm
• Dastek Unichip Q4
• V Tech module
• Dynatech headers
• Custom carbon fiber body kit (Civic GT style)
• Carbon fiber hood (Civic GT style)
• Custom fender carbon fiber
• Custom carbon fiber wing
• hydraulic hood
• Carbon fiber (steer, dashboard, door trim console, mirror back, mid paddle side door console, dash board and paddle back)
• Bucket seat Bridge Low Maxx
• Takata 4 point seatbelt
• Roll Cage 6 points
• Costum interior (MBtech)
• Rays Gramlight rim R18
• Front BBK K-Sport (8 pots & rorot 330mm)
• Toyo Proxes tires (225/40-R18)
• Coil over Buddy Club N +
• 12 inch subwoofer Rockford
• 3-way speaker flux
• Trans coaxial speakers
• Tomi Paint Airbrush

Plus: Big Brake Kit tailored to upgrade engine performance
Minus: Wear Daily, the rear seat is removed

Modification of Honda Brio 2014, Totality So King 2016

Modification of Honda Brio 2014, Totality So King 2016

Jakarta,indonesian - Modified Honda Brio is indeed deserve the title of The King in the contest modification of the Honda Jazz and Brio Tuning Contest 2016 last. Not just about the quantity, but the changes made quite total.

A futuristic concept and masculine designed Deed Kusuma Wijaya, the owner assisted Evan Sumanto, Auto repair shop boss Concept, Surabaya managed to captivate the jury. From the exterior, the appearance of Brio is different from most.

Cosmetics audio meets the rear cabin, SQL concept, suitable for hanging out with my friends

Pull line body kit from the front bumper to the rear, implying Brio aggressive impression too futuristic. "The design was originally designed simple, but must show Brio more muscular," said Evan.

So for the sake of muscular impression, designed the new fender design, which is more elastic about 3-4 cm. "While the rear fender, fender bolt affixed only on fiberglass, with a width approximately equal to the front," said Evan again.

For the sake of cramming rim 18x (9.5 + 10.5) inches, made wide body fenders

Changes wide body is also very reasonable, because the Deed want to cram rims Volk Racing Cerumo Sport which has wide spec 18x (9.5 + 10.5) inches.

Still on the outside, in order to lift the figure manly and masculine, Evan concocting their own custom paint. "The material from Sikkens, mixed specials, the concept of camouflage, like a chameleon, but not tacky," he explained.

Machines already crammed forced induction device

When sprayed on the body Brio, 4-5 generate different colors when viewed from different angles, but once the base color gray metallic one who looks more dominant in the dark.

Besides crowned King, Brio also won Best Gadget Implementer, Best Body Kit and Best Undercarriage

"People call gunmetallic polish," said Evan who spent 3 weeks for painting and body kit. (Blogosmile)

Car modification:

Machine:

Turbo HKS, blow off valve, HKS, air filter HKS, oil catch tank Greedy, HKS intercooler, a custom header, Downpipe, front pipe, resonator, muffler Kansai, Motorized hood, oil cap HKS, cap Radiator D1 Spec, stabilizer Pivot Mega Raisinm Back piggy HKS, battery lid D1 Spec

The legs: coilover GAB, big Brembo Brake Kit, change PCD 5X114,3, rims Volk Racing Cerumo Sport (Made in Japan) 2 Piece Construction, 18x (9.5 + 10.5) inches, Ziex Falken Tires 215 / 35R18 , custom rear camber, lower Bar Ultra Racing, strutbar Hurricane

exterior:

Custom projector head lamp Autovision (front Angel Eyes RGB WiFi, Devil Eyes LED, Back Angel Eyes CCFL, HID bulb Autovision Zenith, ballast Autovision Zenith, custom paint chameleon camouflage, custom body kit, custom wide body, spoiler JS Racing Carbon, sunroof RB1 , sticker Animated HKS Turbo, motorized 4 points (Kap Machine, right-left rear door, and the audio system)

interior:

Indicators Defi (Oil temperature, rpm, water temperature), material upholstery Murano, chameleon paint panels, custom roll bar

Audio:

Head Unit Nakamichi NA1550, 2 way speaker Tanaka 6.5-inch MS-1650C, speaker Tight Bass TB-65 Comp 6.5 inch, subwoofer Tanaka T12.4 MW-12-inch, 4-channel power amplifier MOS PCA-4175 MT-157 Metallic Chrono Monoblock Power amplifier, Sony's PlayStation 3 game console, motorized Audio, Ipad on Dashboard, Power inverter 1,200 Watt

Plus: Full Specs for modification contest

Minus: Visibility to the rear, covered cosmetic audio